PRODUCTS

Designed for application & curing in cold weather. A true epoxy, not a peroxide cured / vinyl ester, as are some brittle cold weather products in the marketplace. This epoxy coating is non-flammable and free of VOC’s. PCS200-35 Cold Weather Epoxy Coating’s application temperature and curing ranges were previously not covered by any “true epoxy” coatings already in the marketplace.

Developed for applications temperature of 20°F to 55°F (-6° to 12°C) and services temps of -40° to 190°F (-40° to 87° C).Coating will continue to cure at 20° F+

Note: Product can be applied at lower temperatures when substrate surface is preheated, and temperature is held > 20° F during curing process.

Developed to compete with the standard epoxy coatings in the marketplace. The PCS200 65 shows outstanding workability and pot life while offering the best in class curing time. Wide temperature range for application and service life. A single coat high build epoxy.

Developed for applications temperature of 55° to 95°F (12° to 35°C) and services temps of -40° to 190°F (-40° to 87° C).

Designed for use in hot environments and on warm operating pipelines. They have the same outstanding characteristics as the PCS200 65 and are specially formulated for better workability and performance in hot weather environments. They sustain longer pot life in extreme heat but still offer excellent curing times. Pot life of up to 20 minutes at 95°F (35°C).

Developed for applications temperature of >80°F (27°C) and services temps of -40° to 190°F (-40° to 87° C).

2 part repair cartridge developed to be dry to the touch in roughly 9 min. at 75°F (23°C). This saves time on the small repairs and allows for holiday testing, “Jeeping”, of repaired coating in 15 minutes.

Developed to fill the void where others in the marketplace leave off. The special combination of hardness, abrasion resistance and gouge resistance while keeping the flexibly often needed during HDD applications. It is designed to have strong adhesion to bare steel or existing FBE coatings. The PCS200 ARO-1 is easy to install in the shop or field. Additionally, it is able to achieve a 80 + durometer in less than 24 hours.